Process Analytics Archives - Page 2 of 7 - Metrohm Australia

Metrohm provides a significant range of scientific instruments and applications designed especially for industries where chemical on-line process monitoring is essential. Manufactured by the most renowned companies in their field, the instruments are not only sold and serviced by Metrohm but customers in Australia and New Zealand can tap into the vast knowledge and experience of the world’s leading scientists using Metrohm’s on location support and service.

New Installation: Alkalinity in Drinking Water

The recently installed alkalinity analyser: the new 2026 Process Analyser Metrohm Australia recently installed the 2026 analyser to monitor the alkalinity concentration in water supply. High alkalinity concentrations in drinking water cause scale deposition in the water distribution system. As a consequence this scaling entails rather extensive and costly maintenance...

Steam circuit monitoring in power plants

Lowering costs and corrosion in one easy step Steam circuit monitoring in power plants The use of amines to control pH levels in water-steam circuits is a common practice. By controlling the pH, corrosion can be limited which in turn lowers down time. Minimising the cost of reagents By monitoring...

Real-time inline predictions of jet fuel properties by NIRS

The Metrohm Application Note AN-NIR-025 describes the determination of various indices (mainly with ASTM and ISO conformance) for the characterisation of kerosene as aviation turbine fuel using Metrohm near-infrared spectroscopy. The following parameters were determined with the aid of an NIRS XDS Process Analyzer: degree of density in accordance with...

Corrosion monitoring for industrial cooling systems

Minimise downtime by monitoring corrosion inhibitors on-line. Copper is widely used for piping in industrial cooling water systems due to its heat transfer properties. Unfortunately, it is highly susceptible to corrosion. Corrosion can cause a loss of efficiency and eventually a failure of equipment leading to costly maintenance, replacement and...

Power Plants: Online analyser to monitor FAC and metal transportation: Ultra trace Fe and Cu

Flow accelerated corrosion (FAC) in power plants: Continuous online ultratrace analysis of Fe and Cu

Monitoring flow accelerated corrosion and metal transportation in power plants: Online ultratrace measurements of Fe and Cu In power plants, corrosion is the primary factor leading to costly and critical downtimes. The water-steam circuits in fossil and nuclear power plants are inherently prone to corrosion, as metal components are constantly...

Alkalinity in drinking water

Public water supplies are vital resources and rather costly infrastructures. High alkalinity concentrations in drinking water cause scale deposition in the water distribution system. As a consequence this scaling entails rather extensive and costly maintenance issues for the municipalities. Keeping the alkalinity in the desired range and thus minimising maintenance...

Total Antimony and Total Arsenic in mining waters online

Stability tests for total As and total Sb measurements Online monitoring of various waters carries many benefits. Besides of making results continuously available, it also pays off financially. Savings can be significant when compared to other methods. Total Antimony (Sb) and Total Arsenic (As) We just completed an extensive survey...

$Inline monitoring of water content in naphtha fractions by NIRS$

Inline monitoring of water content in naphtha fractions by NIRS

Crude oil, which consists of at least 500 different components, is processed by fractionation and refining to produce liquefied gas, gasoline, diesel, heating fuel, and lubricants as well as a large variety of other products. As the «lubricant» of the global economy, it covers approximately 33% of our energy demand...

Measuring multiple dissolved and total metals online simultaneously

More often than not measuring heavy metal concentrations online in a process can be particularly challenging. This is especially the case when the sample contains several metals that interfere with each other during the measurement. Measuring multiple dissolved and total metals online simultaneously: Metrohm Australia has developed a new revolutionary...

Total metal measurements in a process liquor in an Australian metal refinery

Total metal measurements in an Australian metal refinery

The purpose to measure total metals online is to give accurate and more data for the operator to control the process. Having better control of the process increases the efficiency of the process and allows for significant savings in the range of hundreds of thousands of dollars every year. Performing the...

Particle size analysis for process control: continuous monitoring of size and shape, with Dynamic Image Analysis

Particle size analysis is a crucial for ore materials in mineral processing. Whether it be natural aggregates/crushed rock-mass to sands and gravel, through to the floatation products, characterisation of feed and tails, to magnetic separation products in heavy mineral sands. Comminution is energy intensive and requires continuous monitoring to reduce...

The air looks clear today. Is it really? How do we know for sure?

Poor air quality can lead to respiratory illnesses. Some of the key components of smog are sulfur species, halides and alkali earth metals derived from burning coal, combustion engines or even forest fires. Metrohm's MARGA system provides continuous monitoring of aerosols and gases in ambient air, reporting trends in...

1 2 3 4 … 7

Category